Always the correct part
We know our products
Mounting, Balancing
High engine bay temperatures can make hoses, wiring looms and fluid lines brittle over time. This is especially common near exhaust manifolds, turbochargers, downpipes and other high-heat areas.
Exoracing sewn heat sleeve helps reduce heat exposure by placing a protective reflective sleeve around the part you want to protect. It is ideal for planned installations where the hose, line or wiring can be fed through the sleeve before final fitting. For already-installed hoses or wiring, Velcro heat sleeve is usually the easier choice.
The sewn construction gives a tidy, durable finish, while the gold or silver outer layer helps reflect radiant heat away from the protected part. It is a strong choice for oil feed lines, coolant lines, breather hoses, wiring looms and other parts routed through hot engine bay areas.
Measure the outside diameter of the part, not the inside diameter. If the sleeve needs to pass over fittings, bends or connectors, size up to make installation easier. If you are between sizes, check our heat sleeve size chart before ordering.
| Specification | Details |
| Minimum temperature | -40°C |
| Maximum continuous direct temperature | 260°C |
| Maximum continuous radiant temperature | 600°C |
| Melting temperature | 1100°C |
| Material | Lightweight polymer-laminated glass cloth |
| Chemical resistance | Hydraulic fluids, fuels and oils |
| Colours | Gold or silver |
| Length | 0.5m per quantity, up to 1m continuous length |
| Available ID sizes | 15mm, 20mm, 25mm, 30mm ID |
| Cutting tool | Sharp scissors |
| Warranty | Exoracing lifetime warranty |
Sewn heat sleeve is best fitted before the hose, wiring or line is installed, as the protected part needs to be fed through the sleeve. If the part is already fitted and you do not want to disconnect it, use Exoracing Velcro heat sleeve.
Measure the outside diameter of the hose, cable or line you are protecting and choose the closest sleeve size up. If the route has tight bends or bulky fittings, choose the next size up.
It is best used for planned installations where hoses, wiring or lines can be fed through the sleeve before fitting. It gives a cleaner permanent finish than wrap-around sleeve.
Sewn heat sleeve is fed over the part before installation and gives a tidy permanent finish. Velcro heat sleeve is better when the hose, wiring or line is already fitted and you need to retrofit protection without disconnecting it.
Yes. Cut the sleeve to the required length using sharp scissors. Secure the ends if needed to keep the sleeve positioned correctly.
Both colours are designed for heat protection. Choose the colour that best matches your engine bay or surrounding heat-management products.
Official product information supplied by Exoracing.
Exoracing Ltd offers a lifetime warranty against manufacturing defects on this Exoracing Ltd product for peace of mind and a risk-free buying experience! We have 100% faith in our products and know they are of the highest quality, so where most manufacturers offer a year, we decided to offer a massive lifetime warranty.
Exoracing Ltd lifetime warranty will cover repairing, replacing, or store credit to the same purchase value if the part has since been discontinued, at our discretion, for any Exoracing Ltd product that is found defective.
Exoracing Ltd's lifetime warranty policy will only apply if the product was purchased through ourselves or an officially licenced distributor in our network.
This warranty policy is non-transferable and all claims under this policy must be accompanied by the original receipt of sale.
