Forge Motorsport Induction Kit for Hyundai I30 N-Line 1.4 T-GDi Induction Kit FMINDK67

Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer, this was to ensure all our data has been achieved with results as accurately as possible by an independent tuner.

As shown in the dyno results below, peak horsepower increased by 4 BHP with the standard ECU software, however when combined with the Forge Stage 1 ECU calibration . Notably, the power gains begin at 2,300 RPM and continue to rise progressively all the way to the red line.

In addition, torque improvements of up to 12 Nm can be seen from 2400 RPM to 3600 RPM range with further improvement through the rev range. With these combined gains delivered by FMINDK67 the 1.4 GDI engine now feels sharper in the mid-range and continues to pull confidently right up to red line.        

The benefits can be further increased with an ECU re calibration or a performance tuning module, this allows increased potential to be extracted from your performance hardware by unlocking conservative factory settings, optimising combustion, and allowing the engine with its performance hardware to operate closer to its true potential.

Not only does FMINDK67 deliver enhanced performance, but it is also engineered for exceptional durability. As previously mentioned, it is manufactured from our high-performance silicone featuring a reinforced 5-ply construction combined with an advanced fluoro lining for superior reliability.