This turbo blanket should be fitted OVER the existing OEM heat shield
The Forge Motorsport FMTUBL9 has been designed for the Mercedes A45, GLA, CLA AMG stock turbo chargers. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger by further insulating the OE heat shield, the Forge turbo blanket also incorporates further protection to the engines down pipe.
This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 1370°C (2500°F) of radiant heat, which will assist in protecting and prolonging the life of engine components.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power.
Simple to fit using existing OEM hardware.
Please note that a turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be removed as this can cause damage to the blanket.
- Stainless Steel Rivets
- Carbon fabric outer shell
- Calcium Magnesium Silicate Wool constructed Inner Core
- High temperature Silica fabric
Please ensure your engine bay is the same as the one pictured in the 1st image below before purchasing this product; otherwise if you have the engine bay with the fire extinguisher (bulkhead fitted) and associated lines, as highlighted in the 2nd image below, the turbo blanket will not fit
.JPG)
Vehicle compatibility- Mercedes / A Class W176 (2012-2018) / A45AMG (2013-2015)
- Mercedes / CLA Class C117 (2013-2019) / CLA45 (2013-2015)
- Mercedes / GLA Class X156 (2014-2019) / GLA45 (2014-2015)
- Mercedes / GLA Class X156 (2014-2019) / GLA45 (Facelift 2015-)
- Mercedes / A Class W176 (2012-2018) / A45 AMG (Facelift 2015-)
- Mercedes / CLA Class C117 (2013-2019) / CLA45 (Facelift 2015-)
Please check the part number, vehicle details and available options before ordering. Contact TSR Performance for fitment advice.
