Racingline VWR18G700 Golf 7 GTI R Oil Cooler Kit
What's In The Kit?
Oil cooler mounting brackets (two sets)
AN10 210 series Nylon braided feed and return line.
Billet CNC non-return sandwich plate.
Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins.
AN10 10-row oil cooler core.
Billet oil filter housing with removable drop in filter.
Why Fit An Oil Kit?
Our much-anticipated Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.
Adding power to these TSI engines generates more heat to disperse. Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it's really important not to over-cool the oil; our 10-row kit is perfect.
Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties.
The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15 - 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler - doubling up your cooling capability with less heat transfer into the water system.
As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.
Supplied as a complete kit with every part ready for straightforward install.
This Part Fits:
VW Golf 7 GTI 2013+ 5G
VW Golf 7 R 2013+ 5G
VW Golf 7 GTI ClubSport 2016+ 5G
VW Passat 2.0 TSI B8 2015+ 3G
VW Arteon 2.0 TSI 2017+
Audi S3 2013+ 8V
Audi TT 2.0 TSI III 2014+ 8S
Audi TTS III 2015+ 8S
SEAT Leon Cupra III 2014+ 5F
Skoda Octavia vRS III 2014+ 5E
Skoda Superb 1.8 / 2.0 TSI 2015+ B8 3V
NOTE: 2015 AND OLDER CARS MAY ALSO REQUIRE FITMENT OF VWG PART 06L115678Q (A PLASTIC OIL STEM INSERT). THIS IS A RUNNING UPGRADE FROM VWG DEALERS SO MOST CARS WILL HAVE HAD THIS PART UPDATED DURING EARLIER OIL CHANGES.
VW Audi Seat Skoda group tuning specialist. Renowned worldwide for engine building, turbo conversions and bespoke tuning packages.
