HPA high flow air intake manifold 2.0 TFSI EA113 and EA888 Gen1 TSI engines

£899.00
(No reviews yet) Write a Review

If you are unsure whether this part is suitable for your vehicle, please get in touch through our Your Project page, supplying your Make, Model and Reg or VIN, plus details of your project.

 
 
 

HPA Motorsports is proud to announce its updated “Version 2” FSI (EA113) and TSI (EA888) cast aluminum intake manifold.

Much like the original release, the HPA 2.0 manifolds feature better flow, higher boost capacity, and integrated flapper delete; this product will take your 2.0L VW TSI and FSI to the next level. A direct bolt-on replacement for your OEM plastic intake manifold, HPA's performance manifold features a 40% increase in volume over the OEM plenum, and its cast aluminum construction supports larger turbos and higher boost resulting in big potential performance gains.

HPA's Performance intake when combined with tuning and an optimized intake system can achieve significant gains after 3000 RPM!

Features:

  • A 40% larger Plenum over the OEM manifold
  • 24% higher flow than the FSI OEM manifold
  • 12% higher flow than the TSI OEM manifold
  • Even distribution across all runners
  • Integrated water methanol port for single nozzle systems
  • Built-in vacuum port for accessories like boost gauges
  • Canadian manufactured cast aluminum construction
  • Durable matte black powder coat finish

 

Download installation guide for FSI Ea888 GEN1 :HPA manifold instructions EA888 

Download installation guide for TFSI EA113:  HPA manifold instructions

 

FREQUENTLY ASKED QUESTIONS

 

Will this manifold fit on my 2.0L Audi?

The manifold will fit on Longitudinal B8 A4 and the transverse A3/TT's. Will also fit on another 2.0L models, please call for fitment.

 

How much power will I make with your intake manifold?

Because of the unlimited upgrade combinations available, it is difficult to predict the power gains of each individual application. All Version 2 manifolds provide consistent HP/TQ gains throughout the RPM range, even more evident when installed on cars already equipped with K04 or larger turbo modifications. Tuning will be required to optimize the results.

 

Is tuning required to use my manifold?

Because the runner flaps are removed and to gain optimum performance from your setup custom software is advised. TSR performance can provide software solutions for almost every hardware combination please e mail sales@tsr-performance.com for further details.

 

Do you charge for your installation hardware?

No! Our manifolds include everything needed for bolt-on installation including a step-by-step installation manual.

 

Do I need to modify my stock parts to install your manifold?

No! You do not need to remove, bend, or modify any of your OEM components to install our manifold.

 

What if I want to utilize direct port water methanol injection?

As one of the unique features of our Version 2 intake manifolds, additional surface material has been added to the bottom of each runner to facilitate direct-port water meth bosses without welding or further modification. Drilling and tapping each runner can be performed by HPA upon request.

 

How long will it take to fit?

If the product is fitted at TSR's workshop we charge 4 hours installation time. As a home fit we would allow around 6-8 hours.