Product Overview

These high quality Steel Billet Cams for the 2.0L TFSI EA113 engine are manufactured by Cat Cams to suit the original fuel pump drive and cam followers.

This is our TSR "Street Spec" profile, suitable for highly tuned engines that have followed the usual upgrade process inc forged pistons (with deepened valve pockets), steel rods, Supertech valvetrain, upgraded fuel system and high flow turbo with all supporting vehicle hardware.

This profile will retain suitable drive-ability and idle control to be used on a road/street car.

Will suit either a cylinder head with standard port work, or one with mild porting (beware not to take a step backwards with a badly ported head, Direct Injection porting is not an easy task).

Changing from stock cams to these, allows the same power to be produced but with less boost, or more power with the same boost, by increasing the cam duration and lift allows for a wider time period for the incoming charge to be effective therefore resulting in greater performance.

Anticipated power output range is 480-600bhp on pump fuel.

TSR supply these cams WITH VERNIER PULLEY, this is to allow the engine builder to achieve the correct/desired cam timing which is critical.

We advise these cams are used with our Omega piston set:

TSR/Omega Piston Set EA113 - 82.50mm

TSR/Omega Piston Set EA113 - 83.00mm

Typically these cams are in stock ready to ship.